4. when the power led flashes, release the reset button. the router is now in recovery mode. 5. use the asus recovery utility to upload the dd-wrt mini-asus.trx file. 6. after the upgrade, the utility will ask for a router reboot. give it about a minute to be on the safe side before removing the power. once plugged back in, you will be able to. The asus rt-n15 router has 300mbps wifi, 4 gigabit eth-ports and 0 usb-ports. it is also known as the asus superspeedn gigabit wireless router.it also supports custom firmwares like: dd-wrt, openwrt. 9) keep holding the reset button until the power led starts to blink on and off repeatedly. (this means the unit is now in emergency recovery mode) 10) plug in your computer with the asus recovery tool directly into lan port 1 on the router. 11) run the asus recovery software, and select the stock asus firmware. 12) click the "upload" button..
At work we've had several clients' asus rt-n66 routers go bad or flake out. so in this video i attempt to flash the asus rt-n66r router with dd-wrt firmware in an attempt to revive it and. [note] - for asus units, the standard 30/30/30 method will reset the router but you will need to use the restore button followed by a power cycle. the only exception (so far) is the rt-n16 model, follow the same method as stated above but use the wps button instead of the restore button.. To fully reset a router flashed with dd-wrt, perform a 30-30-30 reset: the following procedure will clear out the nvram and set dd-wrt back to default values: with the unit powered on, press and hold the reset button on back of unit for 30 seconds. without releasing the reset button, unplug the unit and hold reset for another 30 seconds..
No comments:
Post a Comment